Dan,
I cannot find the Allen screw kit in your parts list.
What does the kit sell for?
Kenny G
With the carb screw kit the 4 short screw are for the Float Bowl.
The 3 medium screws get the 3 washers on the Top Cap.
The 1 long screw is for the Throttle Bracket hole on the top cap with the little brass sleeve under it.
On the bottom of the Top Cap the two screw holes have a raised edge on it put them in the opposite holes from the throttle bracket.
An don't over tighten it's only a plastic cap.
Last edited by Thumpe; 11-17-2016 at 06:40 PM.
Dan
"My Ride Pics - 501CR"
http://buellridersonline.com/forum/m...mpe/albums/39/
"Dan's Price List" Click on the link:
http://buellridersonline.com/forum/s...ead.php?t=7730
(845) 341-7274 Call or Text
Dan,
I cannot find the Allen screw kit in your parts list.
What does the kit sell for?
Kenny G
*** 2009 Blast *** V&H Exhaust *** Dan's Intake System Along With Recommended Jetting By Dan *** Yellow Skins Purchased, New Old Stock, From Dealers Who Used Yellow Blasts For Riders Edge ***
*** Pirelli Diablo Tire Front *** Pirelli ST 66 140 70S 16 Tire Rear***
*** Hope To Work On Suspension Next ***
Hi Kenny, There right under all the CVP stuff on the list there $6....Dan
Dan
"My Ride Pics - 501CR"
http://buellridersonline.com/forum/m...mpe/albums/39/
"Dan's Price List" Click on the link:
http://buellridersonline.com/forum/s...ead.php?t=7730
(845) 341-7274 Call or Text
Thanks Dan,
I definitely want to get a set of the Allen head screws the next time I order from you.
Kenny
*** 2009 Blast *** V&H Exhaust *** Dan's Intake System Along With Recommended Jetting By Dan *** Yellow Skins Purchased, New Old Stock, From Dealers Who Used Yellow Blasts For Riders Edge ***
*** Pirelli Diablo Tire Front *** Pirelli ST 66 140 70S 16 Tire Rear***
*** Hope To Work On Suspension Next ***