"Forum Price List"
BuellRidersOnline.com The Official Forum Home of D-C Parts
Proudly Serving "The Blast Nation" since 2008.
"Ruthlessly On Our Own Since 2009"
" is my business name short for my Ebay sellers name "DansCustomParts
These are my forum prices to give members a break from the Ebay prices.
*** TO PLACE AN ORDER ***
Let me know what you would like send it to me in a Private Message *WITH YOUR EMAIL ADDRESS* or Email it.
I'll email you a PayPal Invoices for payment for your order and you don't need a paypal account to pay it.
(1) My Custom Intake Boot aka: SuperBoot is $48 shipped.
Is to hold the carb on with no need to support the carb.
It is NOT the OEM stock rubber boot that comes with this I have these boots manufactured to my specs.
(2) Replacement SuperBoot rubber is $25 shipped.
My Partial Intakes:
(1) Just the Bent Intake Flange with CVP
gasket and ss hardware shipped.
K&N Cone filter is $169
K&N Straight filter is $163
UNI filter is $155
(2) The Full Kit Minus the SuperBoot
K&N Cone filter is $224
K&N Straight filter is $218
UNI filter is $210
The Full Bent Series Intake Kits have everything you need to replace the stock intake except for the jets for the carb which I have you will need 175 or 180 main /46 or 48 pilot jets pending on which aftermarket exhaust is used and 170/45 with stock exhaust.
Included in All the Full Kits:
A K&N or UNI Intake filters and a UNI breather filter for the Catch Can Breather for the PVC line, Elbow flange for the carb to mount the filter, SuperBoot to hold it all on, All Stainless Steel hardware, Zipties and CVP
The Full Intake Kits comes in 4 choices:
(1) Cone K&N filters Kit is $259 shipped.
(2) Straight K&N filters Kit is $253 shipped.
(3) UNI filters Kit is $245 shipped
The Outer Part of the Uni filter Only comes in Red and is removable. (see pics)
(4) Outerwears Filter Intake Kit is $265 shipped.
I have Black, Red or Yellow filter colors for this Kit.
(Does Not come with the Dail-A-Jet shown in the pic sorry lol but it Comes with Black Velco Tape to hold the Outerwears filter on Not shown in pic)
I'm also a CV Performance, Outerwears, UNI and K&N Dealer
this is what I stock with Outerwears and CVP
plus I can order you all there other goody's for the carb at a discount also.
CVP I Keep In Stock
EZ Just Mixture Screw includes spring and o-ring - $20.00
EZ Just Idle Screw - $17.00
Main Jets 170,175,180 - $4.00
Pilot Jets 42,44,45,46,48 - $4.00
High Flow Fuel Inlet Elbow - $16.00
Emulsion Tube - $13.00
Carb Gasket - $1.00
Allenhead Carb Screws Replacement Kit - $6.00
For the Top Diaphragm Cap and Float Bowl.
Outerwears I Keep In Stock
(1) For the Cone is $16 shipped & for the Straight $12 shipped for the K&N Filters I use on my intakes.
(2) Replacements for my Outerwears Intakes.
(3) I have the EZ Velocity Stack Filter #12-1267-01 for $12 shipped.
You need to send me your Stock Peghangers to modify into Rearsets for you the charge for the service is $200 an $15 for priority shipping = $215.
Takes me 2 days to get them done an in the mail - priority takes 3 to 4 days on my end - so pending on how you ship them to me around a two week turn around time.
I can do them in Primer Basecoat Paint or Bare Metal if your going to Powdercoat them - I don't do finish coatings.
They come with all stainless steel hardware an brackets to mount the brake cylinder and a tab to weld to frame for mounting the brake reservoir.
The stuff YOU need to do to mount them
You have to get the Buell XB Shifter setup and Drill & Tap the Primary Cover to Mount It.
I have all the part numbers for the shifter or get one off Ebay but don't pay over a $100 for it that's what they go for new!
Front Heim Stabilizer for the 2001-2009 models is $25 shipped these only came on the year 2000 model then discontinued by buell they help with the high speed handling.
Tail Cover Kit
My Tailcover and all the hardware to mount it forum price $39 shipped.
I'll do My Intake Parts in pieces also.
Thank You for your interest in my products.